mmsz5225-v-g to mmsz5267-v-g vishay semiconductors 17431 document number 83387 rev. 1.0, 17-nov-10 www.vishay.com 1 for technical questions within your regi on, please contact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com small signal zener diodes features ? silicon planar power zener ziodes. ? standard zener voltage tolerance is 5 % with a ?b? suffix (e.g.: mmsz5225b-v-g), suffix ?c? is 2 % tolerance ? aec-q101 qualified ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec mechanical data case: sod-123 weight: approx. 10.3 mg packaging codes/options: 18/10k per 13 " reel (8 mm tape), 10k/box 08/3k per 7 " reel (8 mm tape), 15k/box absolute maximum ratings t amb = 25 c, unless otherwise specified 1) on fr - 4 or fr - 5 board with minimum recommended solder pad layout. thermal characteristics t amb = 25 c, unless otherwise specified 1) on fr - 4 or fr - 5 board with minimum recommended solder pad layout. ** please see document ?vishay material category policy?: www.vishay.com/doc?99902 parameter test condition symbol value unit zener current (see table "characteristics") power dissipation t l = 75 c p tot 500 1) mw parameter test condition symbol value unit thermal resistance junction to ambient air r thja 340 1) k/w maximum junction temperature t j 150 c storage temperature range t stg - 65 to + 175 c
mmsz5225-v-g to mmsz5267-v-g vishay semiconductors document number 83387 rev. 1.0, 17-nov-10 www.vishay.com 2 for technical questions within your regi on, please contact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com electrical characteristics maximum v f = 0.9 v, at i f = 10 ma 1) the zener impedance is derived from the 1 khz ac voltage which results when an ac current having an rms value equal to 10 % of the zener current (i zt or i zk ) is superimposed on i zt or i zk . zener impedance is measured at two poi nts to insure a sharp knee on the breakdown curve and to eliminate unstable units. 2) measured with device juncti on in thermal equilibrium. part number marking code nominal zener voltage 2) te s t current maximum dynamic impedance 1) typical temperature of coefficient maximum reverse leakage current 2 % 5 % v z at i zt i zt z zt at i zt z zk at i zk = 0.25 ma vz i r v r v ma %/c a v mmsz5225-v-g c.0 c0 3 20 30 1600 - 0.075 50 1 mmsz5226-v-g d.6 d6 3.3 20 28 1600 - 0.070 25 1 mmsz5227-v-g d.7 d7 3.6 20 24 1700 - 0.065 15 1 mmsz5228-v-g d.8 d8 3.9 20 23 1900 - 0.060 10 1 mmsz5229-v-g d.9 d9 4.3 20 22 2000 - 0.055 5 1 mmsz5230-v-g d.0 d0 4.7 20 19 1900 0.030 5 2 mmsz5231-v-g e.6 e6 5.1 20 17 1600 0.030 5 2 mmsz5232-v-g e.7 e7 5.6 20 11 1600 + 0.038 5 3 mmsz5233-v-g e.8 e8 6 20 7 1600 + 0.038 5 3.5 mmsz5234-v-g e.9 e9 6.2 20 7 1000 + 0.045 5 4 mmsz5235-v-g e.0 e0 6.8 20 5 750 + 0.050 3 5 mmsz5236-v-g f.6 f6 7.5 20 6 500 + 0.058 3 6 mmsz5237-v-g f.7 f7 8.2 20 8 500 + 0.062 3 6.5 mmsz5238-v-g f.8 f8 8.7 20 8 600 + 0.065 3 6.5 mmsz5239-v-g f.9 f9 9.1 20 10 600 + 0.068 3 7 mmsz5240-v-g f.0 f0 10 20 17 600 + 0.075 3 8 mmsz5241-v-g h.6 h6 11 20 22 600 + 0.076 2 8.4 mmsz5242-v-g h.7 h7 12 20 30 600 + 0.077 1 9.1 mmsz5243-v-g h.8 h8 13 9.5 13 600 + 0.079 0.5 9.9 mmsz5244-v-g h.9 h9 14 9 15 600 + 0.082 0.1 10 mmsz5245-v-g h.0 h0 15 8.5 16 600 + 0.082 0.1 11 mmsz5246-v-g j.6 j6 16 7.8 17 600 + 0.083 0.1 12 mmsz5247-v-g j.7 j7 17 7.4 19 600 + 0.084 0.1 13 mmsz5248-v-g j.8 j8 18 7 21 600 + 0.085 0.1 14 mmsz5249-v-g j.9 j9 19 6.6 23 600 + 0.086 0.1 14 mmsz5250-v-g j.0 j0 20 6.2 25 600 + 0.086 0.1 15 mmsz5251-v-g k.6 k6 22 5.6 29 600 + 0.087 0.1 17 mmsz5252-v-g k.7 k7 24 5.2 33 600 + 0.087 0.1 18 mmsz5253-v-g k.8 k8 25 5 35 600 + 0.089 0.1 19 mmsz5254-v-g k.9 k9 27 4.6 41 600 + 0.090 0.1 21 mmsz5255-v-g k.0 k0 28 4.5 44 600 + 0.091 0.1 21 mmsz5256-v-g m.6 m6 30 4.2 49 600 + 0.091 0.1 23 mmsz5257-v-g m.7 m7 33 3.8 58 700 + 0.092 0.1 25 mmsz5258-v-g m.8 m8 36 3.4 70 700 + 0.093 0.1 27 mmsz5259-v-g m.9 m9 39 3.2 80 800 + 0.094 0.1 30 mmsz5260-v-g m.0 m0 43 3 93 900 + 0.095 0.1 33 mmsz5261-v-g n.6 n6 47 2.7 105 1000 + 0.095 0.1 36 mmsz5262-v-g n.7 n7 51 2.5 125 1100 + 0.096 0.1 39 mmsz5263-v-g n.8 n8 56 2.2 150 1300 + 0.096 0.1 43 mmsz5264-v-g n.9 n9 60 2.1 170 1400 + 0.097 0.1 46 mmsz5265-v-g n.0 n0 62 2 185 1400 + 0.097 0.1 47 mmsz5266-v-g p.6 p6 68 1.8 230 1600 + 0.097 0.1 52 mmsz5267-v-g p.7 p7 75 1.7 270 1700 + 0.098 0.1 56
mmsz5225-v-g to mmsz5267-v-g vishay semiconductors document number 83387 rev. 1.0, 17-nov-10 www.vishay.com 3 for technical questions within your regi on, please contact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com package dimensions in milimeters (inches): sod-123 0.1 (0.004) max. 2. 8 5 (0.112) 2.55 (0.100) 3. 8 5 (0.152) 3.55 (0.140) 1.7 (0.067) 1.40 (0.055) mo u nting pad layo u t 2.5 (0.09 8 ) 0. 8 5 (0.033) 0. 8 5 (0.033) 0. 8 5 (0.033) cathode b ar 0.65 (0.026) 0.45 (0.01 8 ) 0.10 (0.004) 1 (0.039) 0.15 (0.006) 1.35 (0.053) 0.2 (0.00 8 ) 0 to 8 0.45 (0.01 8 ) 0.25 (0.010) 0.5 (0.020) ref. re v . 4 - date: 24. sep. 2009 doc u ment no.: s 8 - v -3910.01-001 (4) 17432
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
